Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Oil Pump/Crankshaft Seal, Front, Replacing > Page 3351

Page 2
background image

Raise the car

-

Remove the right front wheel

-

Install the upper timing belt cover

-

Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond

-

Turn a further 1/4 turn clockwise and then back counter-clockwise until the markings correspond

-

Remove the upper camshaft cover.

Remove the timing belt

-

Slacken off the center screw for the belt tensioner slightly

-

Hold the center screw secure. Turn the tensioner eccentric clockwise with a 6 mm Allen key to "10 o'clock"

-

Remove the timing belt.

Remove the vibration damper

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Front Crankshaft Seal > Component Information > Service and Repair > Oil Pump/Crankshaft Seal, Front, Replacing > Page 3351

[PREV PAGE] [NEXT PAGE]