XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Exhaust Pipe: Service and Repair
Flanged Joint, Assembling
Flanged joint, assembling
All mating surfaces must be thoroughly cleaned.
Always replace gaskets, nuts and screws with new ones.
Always use those components shown in the replacement parts range for the relevant area.
that there are not cracks or other damage at the mating surfaces which could result in leakage
that all threads are working correctly
that the gasket faces are flat.
Always remedy if necessary
Always use the listed tightening torques.
Always use copper paste 1161 408 where indicated in the method.
Always follow the listed procedure for tightening torques and, where applicable, angle-tightening.