Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)

Maintenance > Timing Belt > Component Information > Service and Repair > Removal and Replacement > Page 2496

Page 3
background image

Remove the belt tensioner and idler pulley.
Check the rolling surface and the bearings.
Check for any noise. Check for any play in the bearings.
Check that the rolling surfaces are smooth and clean.

Removing oil pump

Remove the belt protection from the oil pump.
Remove the four oil pump screws.
Carefully wiggle out the oil pump. Use a screwdriver at the pry lugs.
Carefully draw the oil pump past the end of the crankshaft.
Carefully clean the gasket face and mating surfaces.

Checking the oil pump

Disassemble the oil pump.
Clean and check all components.
Check for damage and wear.
Replace the oil pump in the event of a fault.

Maintenance > Timing Belt > Component Information > Service and Repair > Removal and Replacement > Page 2496

[PREV PAGE] [NEXT PAGE]