XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Note! Check that the control module's connectors are intact.
Installing the driver door module (DDM)
Install the upper panel.
Position the control module in the hole on the door panel.
Check that the lower mounting for the control module is correctly located in the support on the door panel.
Press the control module into place.
the nut and screw.
the door panel, see Panel front side door, replacing See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Order software for the driver door module (DDM). See: Testing and Inspection/Programming and Relearning/Software Downloading
Initialize the window position in the communication input.