XC90 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2003)
Transmission Position Switch/Sensor: Service and Repair
Gear-shift position sensor, position
Special tools:
999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removal
Removing the air cleaner (ACL) housing
Ignition off.
Remove the air cleaner housing ACL assembly with the intake pipe.
Removing the gear selector cable and connector
Remove the transmission cable from the lever. Use jimmy bar 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar and the cable
mounting from the transmission.
Unhook the mounting and the connector for the transmission from the bracket.
Remove the tie straps for the cable harness and the mounting in the cover for the control system.
Separate connector A for the gear-shift position sensor. Remove the gear-shift position sensor from the mounting.
Removing the gear-shift position sensor