volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Charging/Computer Controls - DTC CEM-DD21 Stored|Page 23862 > < Charging/Computer Controls - DTC CEM-DD21 Stored|Page 23860
Page 24
background image

The seal should not be loose in any area (slightly pull to check). Check presence of air escape holes and make sure they are free.

Service: 

Expose and clean air-escape holes if needed. Replace the seal if loose or damaged.

Be aware that replaced seals take some time to take shape. It is best to leave the original seals in place unless they absolutely must be replaced.

Step 1.4 Check door latch:

Charging/Computer Controls - DTC CEM-DD21 Stored|Page 23862 > < Charging/Computer Controls - DTC CEM-DD21 Stored|Page 23860