XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Move the hood catch to one side.
Unhook the cable.
Note! Note the position of the lock cable.
Replace the lock.
Installing the hood release catch (right-hand side)
Note! For tightening torques, see See: Specifications
Install the hood catch.
Secure the hood catch using the 2 M6 screws. Finger tighten.
Hint: Do not tighten the screws for the hood catch until the hood is closed (see the illustration).
Close the hood.
Tighten the 2 M6 screws for the hood catch.
Open the hood.
Install the headlamp. See Headlight/bulb, replacing See: Lighting and Horns/Headlamp/Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing
Headlight/bulb, replacing See: Lighting and Horns/Headlamp/Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing.