XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Remove the rubber mountings for the exhaust pipe.
Removing the sub-frame
Position a lifting table under the sub-frame
Remove the following on both sides:
-
the screws holding the sub-frame brackets in the bodywork
-
the screw for the sub-frame mounting.
Hang up the engine block heater secured on the left-hand side of the sub-frame, if applicable.
Carefully lower the sub-frame.
Note! Ensure that the brake pipe clears the exhaust pipe mounting when lowering the frame.
Note! Ensure that the steering gear screws release from the sub-frame.
Transferring components