XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Note! The crankshaft must not be rotated before the connecting rod cap has been tightened.
Install the cap. Check that any markings correspond.
Lubricate and install new screws. Tighten the screws. See Tightening torque See: Specifications/Mechanical Specifications/Tightening Torque.
Check that the connecting rod can be moved sideways.
Installing the oil pump suction pipe
Install a new seal ring on the suction line.
Carefully press the suction pipe down into the intermediate section. Check that the sealing ring is correctly positioned.
Tighten the screws. Install new sealing rings for the oil ducts to the sump.
Installing the sump
Caution! Check that the rear edge of the oil sump is in line with the rear edge of the engine block. Permitted tolerance ±0.025 mm. Use a steel
ruler and feeler gauge.
Wipe the surfaces dry.
