XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
VIDA (Vehicle Information & Diagnostics For Aftersales)
VIDA (Vehicle Information & Diagnostics for Aftersales)
During the second half of 2004, VADIS (Volvo Aftersales Diagnostic and Information System) was phased out and replaced by VIDA (Vehicle
Information & Diagnostics for Aftersales). The purpose of VIDA is to support service providers in repairing and servicing Volvo vehicles. VIDA
provides Service and Parts information, as well as diagnostic fault tracing, and software downloads. As in VADIS, these areas are integrated into one
single application. All functionality that could be found in VADIS will be found in VIDA. However, in some particular areas, e.g., the diagnostic work
flow, search functionality, and the Parts catalogue, VIDA contains considerable enhancements when compared to VADIS.
Volvo's VIDA (Vehicle Information & Diagnostics for Aftersales) system ties together service and repair data, parts data, service bulletins, software
(firmware) downloads, fault tracing and on-board diagnostic as well as other related information to decrease service time.
Much of the diagnostic information provided here is presented in a manner that assumes the technician is using the web-based Volvo diagnostic
system (VIDA) to diagnose the vehicle. Volvo does not provide any information based on performing diagnosis with a third party diagnostic tool.
Control Modules In the Most Network
Control modules in the MOST network
MOST network
Location Of Components
The MOST network can consist of up to eight control modules.
The infotainment control module (ICM) monitors the MOST network and manages communication. The infotainment control module (ICM) is
monitored by the central electronic module (CEM) on the controller area network (CAN). In addition to the infotainment control module (ICM), there
are two control modules which are standard on the MOST network. These are:
-
the audio module (AUD)
-
the antenna module (ATM).
The table below lists all the control modules which may be included in the MOST network.
Explanation
CAN= Controller Area Network, electrical network for communication
LS CAN= low speed side of the CAN
