Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Page 3213

Page 2
background image

Clean thoroughly around the connectors.
Remove the connector and the back-up lamp switch from the gearbox.

Installation

Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging.

Installing back-up lamp switch

Install the back-up lamp switch. Tighten. See Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging.

Installing the leads

Install the cables in the connector with the opening for the primary lock facing up as illustrated. Press in the secondary lock.

Joining cables

Splice the new connector with cables to the existing wiring. See: Joining the cables See: Brake Light Switch/Diagrams/Diagnostic Aids/Wiring/Joining
the Cables 

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Page 3213

[PREV PAGE] [NEXT PAGE]