XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Install the bevel gear. See See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel Gear
Filling with oil
Top up with new oil. See Replacing the pinion seal for the bevel gear See: Replacing the Pinion Seal for the Bevel Gear.
Sealing Rings Bevel Gear, Replacing
Sealing rings bevel gear, replacing
Special tools:
999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff. Bearing 1035
999 5654 Punch See: Tools and Equipment/999 5654 Punch
999 5655 Punch See: Tools and Equipment/999 5655 Punch
Note! To remove the drive shaft, see Replacing the front right drive shaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Drive Shaft Right, Replacing.
Sealing ring for drive shaft front right side, replacing
Removing the sealing ring
Lever the sealing ring off the crown wheel shaft.
Use a screwdriver or a jimmy bar.
Installing a new sealing ring
Install the new sealing ring for the drive shaft.
Lubricate the seal using wheel bearing grease, P/N 116 1241-3.
Use drift 999 5654 Punch See: Tools and Equipment/999 5654 Punch. Tap in sealing ring to its stop.
If also replacing the seal for the crown wheel shaft, proceed to replacing.
Note! To install the drive shaft, see Replacing the front right drive shaft See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Drive Shaft Right, Replacing.
