XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Sealing ring for crown wheel shaft for bevel gear, replacing
Marking the position of the adjustment nut
Mark the position of the adjustment nut in relation to the housing with a scriber.
Measure the height between the nut and housing. Make a note of the measurement.
Remove screw and split pin.
Removing the adjustment nut
Remove the adjustment nut.
Use wrench 999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff. Bearing 1035.
Removing the sealing ring
Tap out the sealing ring.
Use a screwdriver.
Installing the sealing ring
