XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Installing relevant components
the choke valve with O-rings
the temperature/pressure sensor with O-ring
the O-ring for the choke valve seat
Positioning the sealing panel in the control module
Press the choke valve and temperature/pressure sensor into place on the control module contacts.
Place the cupped washer with the convex side against the temperature/pressure sensor.
Lubricate the sealing rings on the valves with oil, P/N 116 1641-4 (0.3 liters).
Installing the O-ring