XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Installing the vacuum nipple
Wet the plastic hose on the new nipple. Use a soap solution.
Press the hose through the insulation following the previous routing.
Install the hose and nipple on the oil trap. Use a new clamp.
Installing the vacuum nipple, continued
Install the engine coolant hoses on the vacuum nipple. Use new clamps.
Remove the hose clips.
Installing the vacuum nipple, continue
Fold the insulation back into place.
If the insulation breaks, apply tape over the crack.
Installing the intake manifold