XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Arm Rest: Service and Repair
Cool Box/Armrest Components, Replacing
Cool box/armrest components, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Cool box and armrest variants
Cool box and armrest with DVD player. Has a new heavier duty hinge to allow for the DVD player as well as a unique cover.
Cool box and armrest without DVD player. Has a standard hinge and standard cover with an additional seal.
Ignition off.
Removing the cool box and armrest
Note! Note the position of the connectors. Disconnect the connectors.
Remove the 2 screws (1). Press in the catches on both sides (may be stiff). Pull the armrest backwards (2).
Installing the cool box and armrest
Install:
-
the connectors
-
slide the armrest in. Press the armrest into place
-
the 2 screws. Tighten.
Outer cover
Removing the outer cover