XC90 AWD L6-3.2L VIN 98 B6324S (2007)
The DVD player is used to transfer map information to the hard disk. The map information on the hard disk is used to navigate. The Multimedia module
(MMM) has several user functions, such as:
route guidance, i.e. guidance to a specific target (address, a specific hotel etc.)
find a hotel, a car park, a shopping mall, in the surroundings or in the vicinity of a specific place
show TMC information, i.e. traffic information (traffic jams, closed roads etc.)
show remaining mileage and estimated journey time to selected destination.
system settings for navigation
The start menu allows the user to choose whether the system is to start in a Beginner or Advanced user setting. In the Beginner user setting, only the most
important functions are available and are intended for beginners. All functions are available in the advanced user setting
The navigation menu and quick menu display, on the monitor, all the functions that are available for the user to use.
Certain functions can be configured by the user in system settings. These functions are:
type of route guidance (fastest route, shortest route or easiest route)
avoid ferries, toll roads etc or not
volume voice guidance
The on-screen menu can be controlled using the navigation buttons on the reverse of the steering wheel (16/46).
The buttons consist of:
an enter button
a back button
a control button that can move the marker on the screen up, down, left and right.
The commands are transmitted from the Steering wheel module (SWM) (3/254) via LIN to the Central electronic module (CEM) and on to the
Infotainment control module (ICM) (16/94) on the CAN network. The Steering wheel module (SWM) converts the electrical signal to an optical signal
and sends it onwards to the multimedia module (MMM) (16/108) via the MOST network.
The remote control for the Multimedia module (MMM) has the same functions as the steering wheel buttons.