Volvo Workshop Manuals
XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Diagrams > Diagram Information and Instructions > Page 1109
Press in the active catches on both sides of the socket housing and slide out the receptacle housings.
Caution! Disconnect and work with only one cable at a time to minimize the risk of mixing them up.
Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool 951 2812 Terminal removal tool See:
Check that the cable terminal is undamaged.
Press the secondary lock into place.
Connector Type 1
Special tool 951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
|[PREV PAGE] [NEXT PAGE]|