XC90 AWD L6-3.2L VIN 98 B6324S (2007)
-
Cut away the corner on the plastic foam acc. to the illustration.
-
Done on both sides.
-
Localize the markings where the plastic foam was removed.
-
Saw out acc. to the markings with a keyhole saw. At the top edge the slot shall be sawed through the outer casing, plastic foam and inner casing at
the same time.
-
Repeat the step on the car's other side.
-
Remove the headlight washer on both sides by removing the clip (1) and screws (2).