XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the
cause of the fault.
Removing the passenger door module (PDM)
the door panel, see Panel front side door, replacing See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
the nut and screw holding the control module in place
Grasp the underneath of the control module. Press upwards. Carefully pull the control module from the lower catches.