Volvo Workshop Manuals
XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1490
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
the nut and screw
the door panel, see Panel front side door, replacing See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Order software for the passenger door module (PDM). See: Testing and Inspection/Programming and Relearning/Software Downloading
Initialize the window position in the communication input.
Rear Electronic Module (REM), Replacing
Rear electronic module (REM), replacing
Note! Since the illustrations in this service information are used for different model years and/or models. Some variation may occur. However,
|[PREV PAGE] [NEXT PAGE]|