Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2817

Page 12
background image

Cable routing on the left-hand side of the bumper 

-

Press up the tabs on the plates and insert the cable in the holes drilled earlier. Position the cable as illustrated

-

Route the cable to the right-hand side of the existing cable duct as before.

Cable routing on the right-hand side of the bumper 

-

Press up the tab on the plate. Insert the cable in the previously drilled hole. Position the cable as illustrated.

Applies to all models

-

Press the large cable harness for the sensors into place in the existing cable duct (1) in the bottom of the rear section.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2817

[PREV PAGE] [NEXT PAGE]