Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2823

Page 18
background image

Illustration C applies to cars with three rows of seats

-

Remove the two screws (2) from under the cover

-

Remove the covers (3) over the front mountings for the left-hand side panel. Pry the covers off. Use a plastic weatherstrip tool or a small
screwdriver

-

Remove the screws (4)

-

Remove the clip (5) at the bottom of the storage compartment in the panel (Applies to cars with three rows of seats)

-

Pull out the panel slightly at the top edge so that the clips on the inside release. Remove the panel by pulling it straight upwards.

-

Clean the flat surface where the Velcro strips will be applied. Use a mixture of 30% windscreen washer fluid and 70% water

-

Wipe dry.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2823

[PREV PAGE] [NEXT PAGE]