Volvo Workshop Manuals
XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 3047
the 8 seat frame screws (1)
the 8 seat frame screws (2).
Raise the rear edge of the seat frame approximately 25 mm. Position a block (3) between the frame and the transmission tunnel.
Removing the cap over the level sensor
|[PREV PAGE] [NEXT PAGE]|