Volvo Workshop Manuals
XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing > Page 3048
Remove the cover (1) to replace the right-hand sensor and (2) to replace the left-hand sensor.
Disconnect the connector for the relevant sensor.
Note! Blow clean around the sensor using compressed air before removing.
Remove the mounting screws for the sensor. Pull out the sensor.
Clean around the sensor seat so that when installed the sensor will be in the correct position against the pulse wheel. Use a soft brush.
|[PREV PAGE] [NEXT PAGE]|