Volvo Workshop Manuals
XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Page 3469
Clean thoroughly around the connectors.
Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging.
Installing back-up lamp switch
Install the back-up lamp switch. Tighten. See Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging.
Installing the leads
Install the cables in the connector with the opening for the primary lock facing up as illustrated. Press in the secondary lock.
Splice the new connector with cables to the existing wiring. See: Joining the cables See: Brake Light Switch/Diagrams/Diagnostic Aids/Wiring/Joining
|[PREV PAGE] [NEXT PAGE]|