Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD V8-4.4L VIN 85 B8444S (2005)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Page 3470

Page 3
background image

Installing connectors

Install the connector with cables on the back-up lamp switch.
Install a tie-strap as illustrated so that the cable harness is not in contact with the gear selector cable.

Install the bracket on the gearbox using the 3 M8 screws. Tighten.

Finishing

Installing the gear selector cables

Install the air cleaner (ACL) housing and the gear selector cables. See Gearbox cables, replacing .

Sensors and Switches > Sensors and Switches - Lighting and Horns > Backup Lamp Switch > Component Information > Service and Repair > Page 3470

[PREV PAGE] [NEXT PAGE]