Volvo Workshop Manuals
XC90 FWD L6-3.2L VIN 96 B6324S2 (2010)
Transmission and Drivetrain > Differential Assembly > Seals and Gaskets, Differential > System Information > Technical Service Bulletins > All Technical Service Bulletins for Seals and Gaskets: > TJ22103 > Dec > 09 > Drivetrain - Rear Differential Leaking And Resealing > Page 3057
If the leak is confirmed to be coming from the rear differential housing halves, separate and reseal the rear differential housing according to the following
1. Note! Some variation in the illustrations may occur, but the essential information is always correct.
Final drive, removal
2. This method applies to all final drives with a 45° mating flange.
Remove the final drive from the vehicle according to VIDA:
Removal, replacement and installation
Rear axle, drive shafts
Drain the oil from the final drive.
General (applies to all models)
3. Warning! Use protective eyewear.
Clean the final drive using isoproponal PN 1161721 around the mating flange.
Blow clean with compressed air.
- The screws, quantity (qty) 8 or 9, depending on model.
Final drive, cleaning
|[PREV PAGE] [NEXT PAGE]|