Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 96 B6324S2 (2010)

Transmission and Drivetrain > Differential Assembly > Seals and Gaskets, Differential > System Information > Technical Service Bulletins > Customer Interest for Seals and Gaskets: > Page 3079

Page 2
background image

Service

If the leak is confirmed to be coming from the rear differential housing halves, separate and reseal the rear differential housing according to the following
procedure in conjunction with the removal and replacement procedures in VIDA.

1. Note! Some variation in the illustrations may occur, but the essential information is always correct.

Final drive, removal

2. This method applies to all final drives with a 45° mating flange.

Remove the final drive from the vehicle according to VIDA:

INFORMATION

REPAIR

Removal, replacement and installation

Power transmission

Rear axle, drive shafts

Final drive

Drain the oil from the final drive.

General (applies to all models)

3. Warning! Use protective eyewear.

Clean the final drive using isoproponal PN 1161721 around the mating flange.

Blow clean with compressed air.

Remove:

- The screws, quantity (qty) 8 or 9, depending on model.

Transmission and Drivetrain > Differential Assembly > Seals and Gaskets, Differential > System Information > Technical Service Bulletins > Customer Interest for Seals and Gaskets: > Page 3079

[PREV PAGE] [NEXT PAGE]