XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Remove the sound barrier on the passenger side by first removing the two screws and then prizing it away at the top edge.
-
Remove the nine screws, route the glove compartment straight out and disconnect the connector.
-
Mark as illustrated on the outside of the glove compartment's end.
-
Pre-drill using a - 2.5 mm (3/32") bit.
-
Drill using a -30 mm (1 3/16") hole saw.
-
Smooth off the hole edges.
