XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Fold out the load securing eyelet.
-
Insert a scriber with an angled tip into the hole in the top of the cover.
-
Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull the cover off.
Illustration B applies to cars with two rows of seats
Illustration C applies to cars with three rows of seats
-
Fold up the seats in the third row (applies to cars with three rows of seats).
-
Remove the screws (2) for the load securing eyelets in the left-hand side panel.
-
Remove the covers (3) over the front mountings for the left-hand side panel. Pry the covers off. Use a plastic weatherstrip tool or a small
screwdriver.
-
Remove the screws (4).
-
Remove the clip (5) at the bottom of the storage compartment in the panel (Applies to cars with three rows of seats).
-
Remove the panel by pulling out the upper edge slightly so that the clips on the inside release. Pull the panel straight up.