XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Front Bumper Reinforcement: Service and Repair
Bumper rail front, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the front bumper rail
The bumper rail is secured to the side members using four screws and two plug welds on each side. The plug welds are in metal washers pressed into the
aluminum member.
Check that the general dimensions of the car are correct. See Side members / wheel arches front, alignment chart .
Remove:
-
the components. See Front section, exposing
-
the 4 screws.
Drill out the spot welds.
Grind clean.
Apply welding primer.
Installing the front bumper rail