Rear Cross-Member Bushing Replacement - Service and Repair
Note! Align the bushing in relation to the sub-frame as illustrated.
Press in the bushing.
Use special tool:
-
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder together with 951 2566 Hydraulic pump See:
Tools and Equipment/951 2566 Hydraulic Pump
-
999 7244 Counterhold See: Tools and Equipment/999 7244 Counterhold
-
999 7243 Socket See: Tools and Equipment/999 7243 Socket
-
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12
-
999 7037 Connecting rod M14X400 See: Tools and Equipment/999 7037 Connecting Rod M14X400
Note! The cutout on the washer (see arrow), should be directed forward to be seated correctly for the filler pipe support.
Use 951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder together with 951 2566 Hydraulic pump See: Tools
and Equipment/951 2566 Hydraulic Pump
Press the washer in position.
Use special tool:
-
999 7244 Counterhold See: Tools and Equipment/999 7244 Counterhold must be turned with the flat side against the bushing
-
999 7097 Drift See: Tools and Equipment/999 7097 Drift must be turned with the flat side against the washer
-
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12