volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Skid Plate > < Rear Cross-Member Bushing|Service and Repair|Page 23175
Page 5
background image

-

951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder together with 951 2566 Hydraulic pump See:
Tools and Equipment/951 2566 Hydraulic Pump 

-

999 7037 Connecting rod M14X400 See: Tools and Equipment/999 7037 Connecting Rod M14X400 

Carefully raise the vehicle's rear suspension.

Warning! Always ensure that the vehicle rests on the lift's lift arms when working with the lifting table.

Install:

-

the screws for the sub-frame, 2 pc. Tighten, see: Tightening torque See: Specifications/Mechanical Specifications/Steering 

-

the bracket for the filler pipe

-

the 2 x M8 screws in the bracket under the exhaust pipe.

Remove the lifting table.

Install the rear wheels. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Skid Plate > < Rear Cross-Member Bushing|Service and Repair|Page 23175