XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Lubricate the contact surfaces of the brake pads using silicone grease, part no. 1161687 (12 ml) or part no. 1161688 (50 ml)
(Do not lubricate the sliding pins)
Installing the brake pads
Press piston back into cylinder on brake caliper.
Check that the dust cover is correctly positioned.
Install:
-
new brake pads
-
the brake caliper.
Installing guide pins in the brake caliper
Note! Check the rubber sleeves of the locating pins. Replace if necessary.
Insert the locating pins in the rubber sleeves.
Tighten the locating pins. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Install the protective caps.
Install the securing spring.
Finishing
Check the brake fluid level in the reservoir.
Depress the brake pedal a few times. Check the level of the brake fluid reservoir.
Top up if necessary.
Install the wheels. See: Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.