XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Brake Pad: Service and Repair
Brake Pads Rear, Replacing
Brake pads rear, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparations
Remove the wheels on both sides.
Removing brake pads
Note! Minimum recommended pad thickness/replacement limit when installing new brake pads = 2 mm.
Remove the retaining spring and locating pins for the brake calipers.
Remove:
-
the securing spring (3) carefully so that it does not deform
-
the protective caps (1) from the two locating pins (2)
-
the locating pins, use hex socket 7 mm.