XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Route the cable from the engine compartment through the hole in the carpet.
-
Grease in the O-ring with low temperature grease P/N 1161427.
Note! ! Make sure that no grease gets onto the connector surfaces.
-
Connect the cable to the passenger compartment connector socket. Press a locking sleeve (from the kit) over the joint.
-
Fold the carpet back into position and install the passenger compartment connector socket using both the screws.
Reinstall:
-
the sound barrier
-
the sill trim panel
-
the cover panel in the lower edge of the B-pillar panel
-
the cover panel for the seat's mounting
-
the centre console's right-hand side panel.
