XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Only applies to cars with air baffles for the brakes
-
Raise the car.
-
Remove the screw (1) in the left air baffle (2) for the front brake.
-
Remove the left-hand air baffle by pulling it backwards.
-
Remove the right-hand air baffle in the same way.
-
Remove the middle air baffle (1) by first removing the screws (2). Then depress the catches (3) and pull the baffle back.
-
Remove the engine splash guard (4) by first removing the screws (5).
-
Drill holes for the timer relay in the lower side/front edge of the left-hand front member using a -4 mm (5/32") drill bit.
-
Treat the edges of the holes using a rust-proofing agent.