XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Detach the cable for the passenger compartment connector socket from the clip in the edge of the plate, at the bending rubber hose for the water
drainage.
-
Route the rubber grommet with cable out to the passenger compartment connector socket from the passenger compartment.
-
Remove the rubber grommet from the cable and place it to one side. There is a new rubber grommet on the routed cable.
-
Cut away the very top of the rubber grommet.
-
Grease in the rubber grommet using low temperature grease part no. 1161417-9 in order to make it easier to install the rubber grommet in the hole
in the cowl.
-
Guide the cable into the rubber grommet.