XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Remove:
-
the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing
-
the switch
Hint: Use a small electrician's screwdriver to pry up the switch by the lock. Depress the switch at the rear edge. Pull straight out.
-
the 2 x screws
-
the control module.
Installation
Installing the damper motor module (DMM) for air distribution
Install:
-
the control module in position. Adjust the shaft journal so that it goes in
-
the 2 screws. Tighten alternately
-
the switch. Ensure that it is correctly positioned
-
the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing.
Note! Identify the damper motor module (DMM) for air distribution. See VIDA vehicle communication.
Finishing
Testing the climate control system