XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the control module.
Installation
Installing the damper motor module (DMM) for temperature on the passenger side
Install:
-
the control module in position. Adjust the shaft journal so that it goes in
-
the 2 screws. Tighten alternately
-
the switch. Ensure that it is correctly positioned
-
the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair.
Note! Identify the damper motor module (DMM) for temperature. See VIDA vehicle communication.
Removal
Removing the damper motor module (DMM) for temperature on the driver's side