XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Remove:
-
the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing
-
the connector from the control module
Hint: Use a small electrician's screwdriver to pry up the switch by the lock. Depress the switch at the rear edge. Pull straight out.
Pull the control module out slightly. Position the point of the electrician's screwdriver between the arms on the control for the lever. Pry the arms away
from the ball on the motor lever.
-
the 2 x screws
-
the control module.
Installation
Installing the damper motor module (DMM) for temperature on the driver's side
