XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Install:
-
the control module in position. Adjust the shaft journal so that it goes in
-
the lever for the mechanism on the ball for the motor lever
Hint: Insert the point of the electrician's screwdriver behind the lever and round-nosed pliers or similar behind the motor lever. Press the ball onto
the mechanism.
-
the 2 screws. Tighten alternately
-
the switch. Ensure that it is correctly positioned
-
the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing.
Note! Identify the damper motor module (DMM) for temperature. See VIDA vehicle communication.
Finishing
Testing the climate control system
Carry out a performance test on the climate control unit. See: Climate system, performance test See: Testing and Inspection/Component Tests and
General Diagnostics/Climate System, Performance Test.
R.H.D
Damper motor module (DMM) temperature, replacing