XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Blower Motor: Service and Repair
Blower Fan Motor Rear, Replacing
Blower fan motor rear, replacing
As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Remove the rear left side panel. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Side Panel Cargo Compartment, Replacement.
Removing the rear blower fan motor
Remove the rubber seals and the cable terminals.
Remove the 3 screws for the blower fan motor (A).
Installing the rear blower fan motor
Note! For tightening torques, see Specifications See: Body and Frame/Specifications.
Install:
-
the blower fan motor using the 3 M5 screws. Tighten
-
the cable terminals and the rubber seals.
Check the function.
Install the rear left side panel. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Side Panel Cargo Compartment, Replacement.