XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Blower Motor: Service and Repair
Blower Fan Motor/Power Unit, Replacing
Blower fan motor / power unit, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Remove the dashboard. See Dashboard, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Dashboard, Replacing.
Detach the climate control unit and member and angle it out. See Climate unit, replacing See: Housing Assembly HVAC/Service and Repair/Climate
Unit, Replacing.
Removing the fan motor from the climate control unit
Note! Do not detach the air conditioning (A/C) pipes or the engine coolant hoses.
Remove:
-
the drain hoses from the engine and filter housing. Then move the drain hoses out of the way
-
the connector.
Remove the 5 screws from the blower fan motor.
Detach and remove the blower fan motor and fan shroud.
Removing the blower fan motor