XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Headlamp Alignment Actuator: Service and Repair
Motor height control headlamp, replacing
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Preparatory work
-
Remove the headlamp. See Headlight/bulb, replacing See: Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing Headlight/bulb,
replacing See: Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing.
Removing the motor
-
Disconnect the connector
-
Remove the motor by turning a 1/4 turn clockwise
-
Twist the motor downwards along the shaft so that the ball releases from the channel in the reflector. See the illustration.
Installation
Installing the motor