XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Twist the adjusting screw on the motor so that the shaft is extended, in order to facilitate installation
-
Remove the cover from one of the bulbs
-
Pull the reflector backwards
-
Apply grease to the ball and place it in the groove as illustrated
-
Twist the motor into place
-
Connect the connector
-
Install the cover.
Finishing work
-
Install the headlamp. See Headlight/bulb, replacing See: Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing Headlight/bulb, replacing
See: Headlamp Bulb/Service and Repair/Headlight/Bulb, Replacing
-
Adjust the headlamp alignment. See Headlamps, aligning See: Adjustments.