XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Note! Check that there is no dirt in the optical connectors.
Connect the connectors.
Note! The bend radius of the optic cables and antenna cables must not be less than 25 mm.
Install:
-
the phone module (PHM) and the bracket
-
the 2 screws. Tighten.
Hint: To facilitate installation of the control module, the rounded corner can be cut even with the corner of the control module. See illustration.
Finishing
Installing the dashboard environment panel
Install the bracket for the dashboard environment panel / infotainment panel. See: MiniDisc / CD control module, replacing .
Ordering software