Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1693

Page 2
background image

Release the 3 clips.

Remove:

-

intermediate section

-

the engine cooling fan (FC) if applicable

-

the 2 screws for the connector holder at the front edge. Disconnect the retaining clips for the connector holder using a screwdriver. Pull up the
contact holder and the rubber grommet

-

the screw at the rear edge of the bottom piece

-

the tie straps for the cables

-

the bottom section by pulling it backwards until the hook releases.

Removing the connector

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1693

[PREV PAGE] [NEXT PAGE]