Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1728

Page 24
background image

-

Flip the anti-dazzle button toward the lens. Disconnect the connector in the control module by pressing the catch through the opening. Use a
screwdriver.

-

Remove the screw from the control module.

-

Remove the control module.

Check

Check that the control module connectors are intact.

Installing the control module

-

Screw the control module screw into place.

-

Connect the connector for the control module.

-

Reinstall the cover for the control module connector.

-

Connect the 2 connectors.

-

Press the bulb holder into place.

-

Install the ground lead.

-

Install the 2 screws at the front edge.

-

Install the lens.

Ordering software

Order applicable software.  See: Testing and Inspection/Programming and Relearning

Finishing

Program in the data read off from the old control module.

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Central Electrical Unit Engine Compartment > Page 1728

[PREV PAGE] [NEXT PAGE]